Welcome to Zhejiang Weidenuo Machinery Technology Co., Ltd.

When the milling cutter head is rented, we will require the milling cutter head operator to undergo professional training and obtain a permit issued by the safety and quality supervision department, and must be certified to work. In addition to this, the milling cutter head operator needs to know the following:

Operators must wear safety helmets, use labor insurance products properly, and comply with various safety regulations when operating the milling cutter head. The equipment leased by the milling cutter head can only be used for the pumping of concrete, and any use other than this is prohibited. Any protective device on the cutter head lease can be removed.

The operator must carry out necessary routine inspections on the vehicle before starting, during driving and after receiving the milling machine. According to the Maintenance Manual, the mechanical, electrical and hydraulic systems of the milling machine head rental products are regularly carried out. Check and make inspection records, and the hidden dangers that endanger safety must be eliminated in time.

It is strictly forbidden for the operator of the milling cutter to change the shape and system of the equipment for the milling cutter head. This includes changing safety pressures, operating speed settings, switching to large diameter ducts or increasing duct wall thickness, changing control procedures or wiring, and changing the milling cutter head boom and legs.

The milling cutter head operator taps the 砼 conveying pipe rented by the milling cutter head every day to check the thickness of the pipe wall. The minimum wall thickness should be replaced in time. When hammering the test, a wooden hand hammer should be used and it should not be inspected under the pressure of the pipeline. I believe that through the above information, everyone should have a more comprehensive understanding of the knowledge of the milling cutter head. I hope to bring you useful value!